Industry news

　　With the increasing demand for product upgrading in automobile manufacturing industry, the original processing technology of automobile body parts can not fully meet the current product quality and production requirements. Laser cutting equipment has the characteristics of processing high-precision, porous and complex parts. It can be widely used in automobile manufacturing. Compared with other NC cutting equipment, it has irreplaceable advantages.

　　1、 Suitable for accessories of various materials

　　There are many kinds of materials, such as low carbon and low alloy steel, ferritic stainless steel, aluminum alloy, etc. It can be processed by laser cutting equipment, and its processing range has covered almost all materials in automobile processing.

　　2、 High machining precision

　　Compared with other equipment, laser cutting equipment has higher machining accuracy and can meet the machining requirements of high-precision accessories.

　　3、 Narrow slit width

　　Small notch is beneficial to reduce the spacing of pipe fittings, improve the utilization rate of materials, and produce less cutting slag during cutting.

　　4、 High material utilization

　　When cutting accessories, you can cut different accessories of the same thickness and material, with low cutting roughness. In the automobile manufacturing industry, the workpiece section roughness processed by different NC cutting equipment is obviously different, and the laser cutting section roughness value is low.

　　6、 Small heat affected zone

　　In the process of laser cutting, the edge of the material to be cut will produce heat affected zone due to heating. However, compared with other processing methods, the energy concentration and heat affected zone of laser cutting are smaller, which is of great significance for ferritic stainless steel and high-strength steel easy to harden, and is conducive to improving the quality of weld.

　　7、 The laser cutting cost of small batch production is low

　　In mass production, the mold blanking process is selected for processing. In mass production, the manufacturing cost of the mold is usually allocated to each accessory, with low production cost. However, if it is a small batch production, the die blanking process is adopted, which not only has a long manufacturing cycle, but also can not meet the timeliness of part processing. The die manufacturing cost is allocated to each part, and the processing cost is relatively high. Laser cutting can ensure one-time forming of parts, improve the timeliness of parts processing, and is suitable for small batch production.